how to bend rebar into a circle

Bending rebar into a circle is a process that requires some skill and the right tools. Here's a step-by-step guide on how to do it:

Materials:

• Rebar

• Rebar cutter

• Rebar bender

• Safety glasses

• Gloves

Steps:

1. Cut the rebar to the desired length using a rebar cutter. Make sure to wear safety glasses and gloves for protection.

2. Mark the center of the rebar with a marker or tape measure. This will help you know where to start bending the rebar.

3. Place the rebar in the bender with the marked center aligned with the center mark on the bender.

4. Begin bending the rebar slowly, making sure to keep it aligned with the center mark on the bender.

5. As you bend the rebar, keep checking that it's forming a circle of the desired size and shape.

6. Once you've completed the circle, remove the rebar from the bender and inspect it for any cracks or weaknesses.

7. If the rebar looks good, you're done! If not, you may need to make some adjustments or start over.

Remember to always wear safety gear and be careful when handling rebar, as it can be sharp and potentially dangerous if not handled properly.